Psion EP10 Manuel d'utilisateur télécharger pdf (Page 245)

Appendix C: Imagers Applet

Using the Imagers Applet

C-5

Psion EP10 Hand-Held Computer User Manual

Low light near

This preset is designed for dark conditions, it uses a longer exposure time and includes the flash.

C.3 Using the Imagers Applet

C.3.1 Configuring the Image Capture Presets

To configure the image capture presets, open the dialog box as follows:

•Tap on Start>Settings>System tab.

•Tap on the Imagers icon, and if it’s not already selected, tap on the Imaging tab.

The following screen is displayed:

Figure C.2 Imaging Tab

This window lists all the presets, both predefined and custom. Presets are identified as follows:

• Predefined presets are marked as read-only.

• Custom presets are marked as read and write.

• One preset – either predefined or custom – is marked as active.

C.3.2 Selecting a Camera

Your EP10 has a built-in imager and a camera. One camera must be selected for configuration. To select a

camera:

•Tap on the Camera Presets drop-down menu to view the camera options.

•Choose a camera – either Imager, the imager located at the top of the unit, or Colour Camera, the

camera located at back of the EP10.

C.3.3 Setting the Active Preset

An active preset has an A to the right. To set an active preset:

• Highlight the preset, and tap on the Activate button.

C.3.4 Viewing a Preset

To view the parameter settings in a preset:

• Highlight a preset, and tap on the View button.

The associated preset window is displayed.

1 2 ... 240 241 242 243 244 245 246 247 248 249 250 ... 265 266

Pas de commentaire

Psion EP10 Manuel d'utilisateur Page 245