Psion OMNII Manuel d'utilisateur télécharger pdf (Page 274)

C-34 Psion Teklogix Omnii XT10 Hand-Held Computer User Manual

Appendix C: Bar Code Settings

Decoded (Intermec ISCP)

MSI Plessey

Set Length L1, Set Length L2, and Set Length L3

Lengths for “Codabar” can be set from 0 to 255. The length of a code refers to the number of

characters (i.e., human readable characters), including check digit(s).

Double-tapping on these parameters displays dialog boxes where you can define the code

length that will be recognized by your scanner.

Length Mode

You can choose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.

Length Restriction

Refer to “Length Restriction” on page C-14 for details.

Add/Remove Data

Refer to “Add/Remove Data” on page C-14 for details.

C.3.12 MSI Plessey

Enabled

Set this parameter to on to enable “MSI”.

Enable Plessy

Set this parameter to on to enable “Plessy”.

Check Digit Verification

The available options for this parameter are MOD 10 Check and Double MOD 10 Check.

This parameter uses the specified algorithm of the option you've chosen to ensure the integ-

rity of the symbol data before transmitting. If the data does not contain that algorithm, the

data is not transmitted.

Transmit Check Digit

If the check digit is to be transmitted with the data, this parameter must be enabled.

Plessy Transmit Check Digit

If the check digit is to be transmitted with the Plessy data, this parameter must be enabled.

Minimum Length

Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to

the number of characters (i.e., human readable characters), including check digit(s).

1 2 ... 269 270 271 272 273 274 275 276 277 278 279 ... 357 358

Pas de commentaire

Psion OMNII Manuel d'utilisateur Page 274